Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Should You Charge More When Dealing with Tire Sealant? (VIDEO)

Description Aerosolized tire sealant is widely available, and in some vehicles, it is used in place of a full-size spare. While this “tire repair in a can” might be the best solution in a jam, it creates a messy, stinky situation for a tech changing the tire for a...

An Ode to “Car Talk”

Back in the early aughts, I lived in the Washington, D.C. area for about nine years. Since my parents live in Pennsylvania, this necessitated many three-and-a-half-hour drives (as little as three, if I was lucky) back home for holidays or just a regular visit. At the...

Testing Battery State of Charge – ASE Practice Question (VIDEO)

Description Technician A and Technician B are discussing battery testing. Technician A says that an open circuit voltage of less than 10.5 volts indicates a bad battery. Technician B says that a reading of 12.5 volts indicates an 80% state of charge. Who is correct?A)...

PSA: Be Safe With Carburetor Cleaner, Too

Recently, I wrote about how brake cleaner can be hazardous if not used correctly, and how you should take safety precautions when using it. One of our readers had an insightful comment on the piece.Now, I think it’s debatable that carburetor cleaner is more hazardous...

The Real Meanings Behind OBD-II Diagnostic Trouble Codes (VIDEO)

Description When the check engine light (CEL) pops up and your OBD-II scan tool displays a code, that’s only the start of the diagnostic process. By breaking down the structures used to create DTCs, you can learn how to “decode” beyond the simple descriptions...

What’s Torque-to-Angle All About?

Torque-to-angle, also known as angle-torque or torque-plus-angle, is a fastening method that combines an initial torque application with a subsequent angular rotation to achieve precise bolt or fastener tension. This technique ensures consistent clamping force,...

Hybrid A/C Compressor Oil-ASE Practice Question (VIDEO)

Description Technician A is working on a hybrid vehicle’s air conditioning system that utilizes a high voltage electrical compressor. Technician B says that only the oil specified by the vehicle manufacturer should be used in the compressor. Technician A says PAG oil...

Troubleshooting a “No A/C Compressor Engagement” Fault

As the weather warms, more and more of your customers will be switching over their HVAC control settings to “max A/C”. If the system doesn’t respond by blowing that refreshing cool air into their faces, they will show up at your door to find out why. When faced with...

How do you handle billing shop supplies?

by | Nov 21, 2024

When I first began writing service at an indie auto repair shop, one line item on the bill was “shop supplies.” We tacked on some percentage of the bill, capping at $19.88. Shows you how long ago that was!

Customers would ask about it, and many were angry about the charge. I think I know why, and I’ve since altered the way we invoice shop supplies at my own shop and it seems to work well. Maybe it might work for you, too. To me, there are two issues at hand.

Surprises are okay only if they are to the customer’s advantage, not the shop’s

This was the main reason for some of my customers’ protestations over this charge. We tacked the twenty bones onto the final bill, NOT on the estimate. That’s no bueno; the customer had no reasonable way to account for that extra money. Yeah, it’s just twenty bones, but in the customer’s shoes, it’s tantamount to negotiating after the handshake.

I think it’s fine to overestimate a bit and pull money off the final invoice total if you didn’t go through the amount of consumables you thought you might. Save a customer a buck and you’re a hero. Spend a penny more on a repair than you said you would, though, and you’re a shyster. Perception is reality.

Water pumps are often replaced because of a little coolant loss at the weep hole.
A couple quick scribbles and the customer knows exactly where the money goes—and I don’t get caught having given away a pack of cutoff discs. Photo: Lemmy.

“Shop supplies” sounds like a tacked-on fee

Oh, I know. The costs associated with consumables you must use to run you shop the shop are very, very real. But a customer doesn’t think about it that way. I’m pretty sure it feels to a customer a lot like the VIN-etching-fee-on-a-vehicle-that-comes-with-etched-VINs or “market adjustment” you’ll see elsewhere in the automotive industry. In short, it feels like a cash grab.

I used to explain to inquiring customers that there were things I used that cost real money: nitrile gloves, brake cleaner, rags, and rust penetrant that didn’t easily lend themselves to itemization. That sort of helped.

Now? I just itemize all of it. It doesn’t take that long, and customers don’t seem to take me to task so much on the electronic parts cleaner or gasket maker I had to use to repair their cars.

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Related Articles

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
0 Comments
Newest
Oldest Most Voted
Inline feedback
View all comments