Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Is It Ever Safe to Reuse Torque-to-Yield (TTY) Fasteners (VIDEO)

Description Torque-to-yield fasteners are designed to deform during installation to ensure a secure connection. If a TTY fastener looks to be in good shape after removal, can it be reused? Pete Meier explains why these single-use bolts should always be replaced for...

Do You Survey Your Customers, and How?

Recently, I had the opportunity to take my car to a body shop (it’s a long story). Once the work was done and I was checking out, the office manager mentioned to me that they would be sending me a customer satisfaction survey and encouraged me to fill it out. Then she...

Interpreting Compression Tests–ASE Practice Questions (VIDEO)

Description Technician A has just completed a running compression test using a mechanical compression gauge. Technician B says that the test is used to check the volumetric efficiency of the engine. Technician A says that the higher-than-expected readings indicate a...

Do I Need a Tune-up?

If you’re like me, you might cringe a little. More often than not, they’re hoping this magical procedure will fix some mysterious issue with their car. But let’s break it down: what is a tune-up, anyway? Most dictionaries describe a tune-up as “a general adjustment to...

PSA: Be Safe With Brake Cleaner

If you work in a shop (and if you’re reading this, chances are you do), you are undoubtedly familiar with brake cleaner. And, if you know the scent of brake cleaner, you probably know that using it is not great for your health if it comes in contact with your skin,...

Compression Testing | ASE Practice Questions (VIDEO)

Description Technician A has just completed a dry compression test of a four-cylinder engine. All four cylinders are below specification by about the same amount. After performing a wet compression test, values remained unchanged. What could cause this condition? A)...

When a Voltmeter Isn’t Enough (Video)

Description With the variety of electronically controlled systems on a modern automobile, the days when a test light or simple voltmeter was enough to diagnose problems are long gone. Using a digital storage oscilloscope (DSO) can make troubleshooting faster and more...

The Tightwad’s Way To Install Any Wheel Bearing Race

by | Apr 15, 2025

I don’t own a bearing race driver kit, and I haven’t in 20 years of fixing stuff. I also refuse to use sockets to drive a race. I learned a method a long time ago I’ll pass along to you newer techs: I use the race I’m replacing. I primarily have used this trick when servicing trailers, but there are plenty of late model Ford E-series vans and old 2WD trucks still prowling around that need the odd wheel bearing here and there.

It takes longer to write down the steps than it does to just do the job. Use your punch and drive the old race out; this is going to become your tool. Get the new one started somewhat evenly; a scrap of lumber is perfect for this. Sink it flush with the bearing pocket. Grab your old race and some PPE and cut a slice through it with your whizzy wheel. Drive your new race with that. Here’s a good demonstration:

I’d suggest doing just one thing differently. Stack your old race opposite to the way you see here, so the thick side of the old race is butted up against the thin side of the new race. Use that to tap the new race all the way home. If you do it in this manner, you can just grab the punch that’s still laying there from removing the old race and on this go ‘round, due to the slice, one tap sends it back out the way it came in.

Save some money, save your poor sockets, and save some space in your toolbox.

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Related Articles

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
0 Comments
Newest
Oldest Most Voted
Inline feedback
View all comments