Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Why Your Shop Should Be Using Loaded Knuckles to Save Time and Money

It’s midday on a Friday, and an older-model Subaru rolls into the bay in need of new wheel bearings. In the past, this would have meant a few hours with the shop press, possibly a torch, and maybe some choice words to get the job done. But it doesn’t have to be that...

Use the Little Radiator—and Have Customers Do the Same

Disclaimer: If a car is overheating and it is possible to safely exit the road and stop the car, that should always be the first course of action to avoid the risk of fire. The solution described in this article should only be used where that is not possible. If a car...

PSA: The Right (and Wrong) Ways to Handle Iridium Spark Plugs

For the vast majority of vehicles on the road, swapping out spark plugs is gravy work. Yoink the old plugs, make sure the replacements meet the necessary gap spec, install the new plugs, and button up the ignition system. You’re in and out of there in no time, right?...

Tool Review: Permatex 25240 Thread Locker

Disclaimer: This chemical was purchased at full retail price at the expense of the author, with no compensation from the retailer or manufacturer to write about the item.Be honest: do you always check the manual for the correct grade of factory-recommended sealant on...

Try Doing It the Wrong Way

Today’s article is composed of two quick tips that are distinct and different, but interrelated because they’re used on the same items: the humble fasteners we remove and install hundreds of times daily. These tips are both geared to newer techs since we all must find...

Modern Power Window Switches: Smarter than You’d Think

When was the last time you rolled down the power windows in an older car or truck? I’m talking at least pre-2000. The older, the better. As a passenger, you’ll find that every door has a mix of buttons, switches, locks, and handles to mess around with, plus maybe a...

It’s All About the Process

Man, it feels like just yesterday you graduated with that Associate’s in Automotive Tech, but nope, it's been three months already, and you've landed a solid job at ABC Auto Repair back in your hometown. The boss has been taking it easy on you, dishing out a bunch of...

Rookie Tip: LOF? Leave the Dipstick Sticking Out and the Oil Cap on the Hood Latch

The following video has a great lesson in it, but most salty shop vets will miss it.Other than the obvious blowby issue, one thing that jumps out is the dipstick waving like a flag in the breeze. For you newer mechanics and home gamers: take a lesson! No doubt this...

In The Bay

How do you inspect a serpentine belt for wear?

by Peter F Meier | Mar 28, 2024

5 Comments

Performing a visual inspection of a car part is usually the first step in assessing its condition. In the case of the serpentine belt, any sign of physical damage to the belt means the belt should be replaced, and may indicate the need to more closely inspect the driven components, tensioner, and belt pulleys.

But relying on a visual inspection of your customer’s serpentine belt alone is a mistake.

Since the late ’90s, serpentine belts have been made with ethylene propylene diene terpolymer, or EPDM. This synthetic material does not show visual wear until it is long past its useful life. Instead, you need to think of belt inspections more like a tire inspection.

Therefore, when inspecting a belt, gauge the wear of the ribs and grooves of the belt much like you check the tread depth of a tire. Do this with a special tool like the one shown below.

Many belt gauges use a series of teeth placed in the belt’s grooves to determine wear. Photo: Peter Meier.

Every belt manufacturer makes one, so appearance and use of the tools differ slightly. And every parts supplier usually has boxes of them in stock, available free to anyone that asks for one.

The most common gauge uses a series of teeth that can be rounded or come to a point. Use the tool by placing the tool perpendicular to the belt’s ribs, inserting the teeth into the belt’s grooves. If the tool lies flat on top of the belt ribs, the belt is worn and needs to be replaced.

However, using this style tool, if there is a gap between the top of the belt ribs and the tool, the belt can be placed back into service.

Worn Belt

If a tool of this design lies flat on top of the belt ribs, the belt is worn past its service limits. Photo: Mike Apice.

Serviceable Belt

If there is a gap between the base of the tool and the top of the ribs, the belt is still serviceable. Photo Mike Apice.

Some tools work by inserting teeth into the groove and inspecting the amount of free play between the tool and the grooves. Another tool, like the one shown below, is placed between adjacent grooves and moved radially, magnifying wear your naked eye might not catch.

The gauge offered by Gates uses a single rod that either falls below the rib tops or remains slightly above it. Photo: Mike Apice.

The accessory belt drive relies on a wedging effect to effectively transfer power from the engine to the driven accessories. A worn belt can slip (yet may not cause the characteristic squeal you have heard before) and run hotter than it should. That means more heat is passed on to the bearings of the idler and tensioner assemblies as well as the alternator, power steering pump, air conditioning compressor, and in some applications, the water pump. That excess heat also means premature—and potentially costly—failure of these components. And remember, the belt tensioner is also a wear item. Replace it whenever you replace a worn belt to ensure maximum efficiency from the engine’s accessory drive. Failure to treat these components as a set could result in belt noise and a customer comeback.

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.